IP67 protection means the instrument is fully dust-tight and protected against temporary immersion in water. That gives extra resilience against splashes, wet surfaces and hygienic cleaning procedures in a busy kitchen. The folding probe design makes it easier to carry and protects the probe from damage, while the non-slip TPE coating gives a secure grip even with wet gloves.
Cleanliness is essential in food processes. The DT-161's IP67 body forms a complete barrier to dust and protects against short immersion in water, so the instrument keeps working safely during surface cleaning and sanitation, accidental spills or in steamy conditions. Because the probe folds away, the risk of it bending or taking a knock while carried in a pocket or apron is minimised.
In HACCP systems, temperature is the foremost critical control point. The DT-161 is a practical way to verify and record target temperatures during cooking, cooling, storage and service. MAX/MIN and HOLD make documenting readings easier, and IP67 protection means cleaning and sanitation can continue without setting the instrument aside.
The same instrument covers the core temperature of frozen food below -50°C and hot oil measurements up to +300°C. The 0.1°C resolution helps with fine adjustment in precise recipes such as confectionery, whey and sous-vide, while 1°C steps above 200°C are practical and sufficient.
NTC sensors are known for stable, repeatable results at low and medium temperatures. The DT-161's slim probe tip speeds up heat transfer, giving a practical response time of 0.5–2 seconds. The thin tip avoids making an unnecessarily wide hole in the product and minimises moisture loss.
In dusty production areas or where there is heavy steam, the IP67 protection layer safeguards the electronics. The non-slip TPE surface gives a secure grip even with wet gloves, reducing the risk of slipping and dropping.
HACCP plans require critical control points to be monitored regularly. The DT-161's MAX/MIN functions allow the extremes seen during a process to be checked quickly, and HOLD freezes the value to make note-taking easier where keeping the display at eye level is difficult — at an oven, a steam tunnel or under bright light.
With its IP67 body, folding probe, fast response and wide measuring range, the CEM DT-161 is the practical, durable and dependable answer for food safety and quality control. Across industrial kitchens, laboratories and retail chains alike it combines hygiene, speed and accuracy. MAX/MIN/HOLD and a legible display support disciplined record keeping, while long battery life and an ergonomic body keep the total cost of ownership down.