Frost-protection heating cable with thermostat, 1 m, 16 W

Frost-protection heating cable with thermostat, 1 m, 16 W — KERBL. Country of origin: China. Effective at temperatures as low as -45°C; • Integrated thermostat that turns on when the temperature drops below 5°C and turns off at around 13°C; • Connecting cable length: 2 m; • Underwater waterproof class IPX7; • Mechanical strength class M1. • Cables must not be used on heating pipes; • Do not use 230 V heating cables in areas where there is a risk of animal bites; • Heating cables must not be shortened, so they should be ordered in the correct length; • The thermostat must not be insulated; • Always attach the heating cable to the bottom of the pipe; • The water pipe must be grounded; • 230 V heating cables are ready to connect and should be connected to a power source with a circuit breaker (30 mA residual current device); • Excess cable length can be wrapped around the pipe (remember to maintain a minimum distance of 15 mm between coils); • Do not bend the heating cable, pay attention to the maximum bending radius of about 50 mm; • Heating cables can be attached to the pipe with insulating or aluminum tape (10-2417); • When using plastic pipes, wrap aluminum tape (10-2417) around the pipe before laying the heating cable; • The pipeline and heating cable should be insulated with a maximum insulation of 13 mm; • The thermostat on the heating cable should be mounted in the coldest place on the pipe.